Barco DVI16x16 Guia do Utilizador descarregar pdf (Página 31)

MatrixPRO-II DVI 16x16 Router

________________________________________________________________________

User’s Guide Rev. 04

The left side of the control application shows the signal connection, resolution, EDID,

and routing status of the inputs and outputs.

Figure 5-5: Software GUI Input and Output status screen

5.3.1 Input / output connection

▪ Click on one of the input channels and click on any of the output channels. If

you click on input CH05 (Camera #1) and click on outputs CH05, CH06, CH07

and CH08, the input signal from CH05 will be connected to outputs 05, 06, 07

and 08 as shown in Fig 5-5.

5.3.2 Input channel status

▪ Green LEDs above the input channel numbers indicate that a signal has been

detected. In fig 4-5 above, CH05 and CH10 have detected signals.

▪ When a signal has been detected, the resolution will also be displayed beneath

the channel name (ex. CH05=1920x1080p).

▪ If no signal is detected the input will display ‘Signal OFF’.

▪ DEF., AUTO, OUT. and USER, indicate the current EDID mode assigned to that

input channel (Refer to Chap. 5.2)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Sem comentários

Barco DVI16x16 Guia do Utilizador Página 31